SR1.60E
- Innovative technical solutions
- The high-performance technopolymer flange distributes the radial load better. Compared with the solution with bearings, it can support very high axial loads and is extremely reliable even in situations where installation is difficult or balancing is not good.
- Quick installation in three steps
- Designed for roller shutter manufacturers, it can be installed easily in just a few steps. To install SUPERBE, just make a hole through the shutter tube, insert the motor in the tube and then fasten it.
- Unique performance
- The thicker steel gear and roller shutter crown gear ensure maximum grip.
- Self-learning of limit switch positions
- The new limit switch, with quick connections and integrated electric brake power supply, enables automatic adjustment during the opening and closing phases.
| Technical Data | SR1.60 |
|---|---|
| Base | SR1.60 |
| Including electric brake | SR1.60E |
| Including electric brake and 4-m cable | SR1.60EC |
| Motor supply | 230 Vac 50/60 Hz |
| Max absorbed current | 3.1 A |
| Absorbed power | 690 W / 720 W with SRE.X1 |
| Maximum torque | 170 Nm |
| Capacitor | 20 μF |
| Max roller shutter stroke | 8 m |
| Opening speed with no load | 10 r.p.m. |
| Limit switch | Automatic |
| Operating temperature | -20 °C ÷ + 50 °C |
| Protection rating | IPX0 |
| Electric motor insulation class | F |
| Max roller shutter surface area | 22 ㎡ |
| Max balanced roller shutter weight | 170 kg |
| Roller shutter axis diameter | 60 mm (42/48 mm)* |
| Pulley diameter | 200 / 220 mm |
| Lubrication | Grease |
| Weight | 5.4 kg |
